Vacuum Heat Pump Evaporator

The heat pump evaporator uses electricity as the energy source. It is a very effective technology to evaporate concentrated wastewater at low temperature under vacuum negative pressure. It can handle all kinds of sewage and liquid waste.

Advantages

1.The vacuum degree is about -95KPa, and the evaporation temperature is about 35-40℃;

2. Intelligent automatic control system, simple operation, convenient and efficient;

3. It occupies a small area and is almost unattended;

4. High concentration ratio of wastewater and high purity of evaporated water;

5. Using air energy heating technology, the technology is stable, safe, energy-saving and environmentally friendly;

6. Up to the sewage discharge regulations,almost 0 maintenance.

Application

Wastewater distillation

Wastewater concentration

Concentration of machining wastewater

Emulsion concentration

Coolant concentration

Concentration of pickling phosphating solution

Electroplating wastewater concentration

Landfill leachate treatment

Concentration of high ammonia nitrogen wastewater

High COD wastewater concentration

Spraying wastewater treatment

Coating wastewater treatment

Treatment of Wire Electroplating Washing Wastewater

Treatment of polyamide production wastewater

Technical introduction

The heat pump vacuum evaporator, operating at 35-40 ° C, can significantly reduce the COD of distillate and a small amount of discharged concentrate. The technology is low maintenance cost, automated.

The vacuum evaporator can effectively and simply treat wastewater without using reagents. They are very effective even when traditional technologies are not feasible. With the vacuum heat pump evaporator, the wastewater is converted into two streams: one is highly concentrated, and the other is high-quality water (up to the discharge standard). The evaporator works under vacuum conditions to reduce the boiling temperature of wastewater and reduce energy consumption.

Principle of the vacuum heat pump evaporator

The operation of the heat pump vacuum evaporator is based on making the stock solution reach its boiling point, which is about 35-40 °C under vacuum conditions.

1. Freon (heat medium) is compressed by the compressor, the temperature rises, and the heat is transferred to the waste water in the evaporation tank.

2. After heat transfer, the raw liquid in the evaporation chamber reaches the boiling point (about 35-40 ℃) under negative pressure.

3. Freon after heat exchange of evaporator is cooled through expansion valve.

4. The expanded low temperature Freon makes the temperature of cooling circulating water lower.

5. The low temperature cooling circulating water makes the vapor formed in the evaporation tank condense rapidly to ensure that the evaporation tank is in a negative pressure state.

Therefore, the system doesn't need any other heating or cooling sources.

This means that the process is very beneficial from an economic and management perspective.

Technical specs

Parameter Model	UKZ30	UKZ45	UKZ60	UKZ70	UKZ90	UKZ120	UKZ150
Evaporation capacity	30	45	60	70	90	120	150
Electric consumption ( kwh/liter water)	0.17	0.17	0.165	0.165	0.16	0.155	0.155
Vacuum(Pa)	5000	5000	5000	5000	5000	5000	5000
Temp.(℃)	38	38	38	38	38	38	38
Parameter Model	UKZ180	UKZ240	UKZ300	UKZ360	UKZ480	UKZ600
Evaporation capacity	180	240	300	360	480	600
Electric consumption( kwh/liter water)	0.155	0.155	0.15	0.15	0.14	0.14
Vacuum(Pa)	5000	5000	5000	5000	5000	5000
Temp.(℃)	38	38	38	38	38	38

http://www.unikan-evaporation.com/