TitleProduct

Good Quality Slitting and Rewinding Machine

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Shandong

  • Validity to:

    Long-term effective

  • Last update:

    2017-12-18 21:17

  • Browse the number:

    168

Send an inquiries
+
Jiangyin Shuangma Heavy Industry Equipment Co., Ltd.
Contactaixin:

Mr. Tom(Mr.)  

Email:

telephone:

Arrea:

Shandong

Address:

No. 8 Xiaguang Road, Qiaoqi Xuxiake Town, Jiangyin City, Wuxi, Jiangsu, China 214408

Website:

http://huafeicnc.trade-hlf.com/

+


1.Entry Coil Car
Function putting coil onto roll of un-coiler machine
Structure Coil car is composed of lifting frame and moving trolley.
Features 1).V-shape frame coated with rubber plate, raised and lowered by a hydraulic cylinder. Guided by guide pillar.
2).The car is driven by motor and moves along rails.
3).Oil pipe and cable protected by towline.
2.
Function uncoiling coil plate for further processing.
3. Material-guiding Device
 
Function guiding material plate into leveling machine
Structure composed of Straight head rollers and material-supporting table
Features 1).Hydraulic swing type
2).material-supporting table lifted by hydraulic cylinder
4. Material-guiding and Leveling Machine
Leveling plate for slitting and dragging un-coiler to work  
composed of a pair of pinch rollers and three work rollers  
1).Top pinch roller raised and lowered by motor
2).Pinch rollers and bottom work rollers rotates initiatively.
3).AC motors driven
 

5. Crop Shear
Function cutting off irregular head, 
Features 1).Hydraulic drives type.
2).Downwards shearing.
3).Gear and rack of knife holder drive synchronously.
6. Loop Table
1).Table coated with good PVC plate, raised and lowered by hydraulic cylinder
2).Arc-shape frame is composed of supporting rollers and coated with corrosion preventive and wearproof rubber.
3).Two pairs of Photo sensors installed to control strip level.
 
7. Side Guide
Function Correcting strip direction, preventing it from deflecting and feeding it into slitter.
Structure
 
Composed of vertical guide rollers, movable sliding base, screw sliding rail and adjusting hand wheel.
8.Slitter machine
Function Cutting plate into required width strips.
Features 1).Slitter arbors are rotating initiatively. Driven by AC motor, reducer, gearbox and universal joint shaft.
2).Motorized adjusting geared sleeve eccentric position by worm wheel to change slitter arbor clearance for adjusting blade overlap.
3).Many knives and different thickness spacers on arbor locked by nut for different strips cutting requirement.
9. Scrap Winder (two sets)
Function Recycling waste edges cut by slitting machine
Features 1).Torque motor drive. Speed and winding torque is adjustable.
2).The drum expands and collapse for unloading scraps easily.
11. Separator (2 sets)
Function Separating slitted strips to avoid material tangling when going through tension unit.
Features 1).Two sets of separator shafts can be moved from operating side. Easy to exchange.
2).An anti-jump pressing roll attached.
12. Tension Unit
Features 1).Hydraulic pressing table type.
2).Pressing slide block raised and lowered by hydraulic cylinder. Pressure can be adjustable.
3).Presser foot with ridges

13. Deflector Roll&Feed Plate
1).The polyurethane coated deflector roll installed at the end of tension pad, with the measuring encoder attached
2).Feed plate feeds strips to clamp jaw easily.
 
14. Recoiler machine
1).Single cantilever type
2).Four segments. Hydraulic expansion,With clamp jaw.
3).Drum FWD and REV driven by DC motor, reducer and driven gear.
4).Installed with hydraulic separating pressing beam.
 

17. Hydraulics
Features 1).Hydraulic system pressure
2).Integration pumping station and valve block installed.
3).Hydraulic components are high quality brands from Taiwan and mainland China, Others are Chinese high quality brands
18. Lubrication System
Gearbox and reducer lubricated by oil pool. Others lubricated by distribution grease pump or gun
19.Electrics
1).380V, 3-phase, 5 wires, voltage fluctuation should be within ±10%, AC220V and DC24V for control power.
2).PLC control, working speed of slitting machine and recoiler machine can be controlled synchronously
3).3 kinds of working modes provided: adjusting, manual and automatic, thus automatic running of single-machine and line can be well met.
4).different control panels for a convenient operation, touching screen for main control panel
5).features of self-diagnosing and exhibition of speed and length.
 
1 PLC Mitsubishi  
2 transducer Omron  
3 DC speed controller Imported brands  
4 pulse encoder Imported brands  
5 Touching screen Imported brands  
6 Photos-witch Imported brands  
7 button China top brands  
8 others China top brands